Call: +44 (0) 15395 58555   or   Email:
Call: +44 (0) 15395 58555   or   Email:


IPC Electronics Ltd designs and manufactures a range of high quality electronic instruments for the educational and industrial sectors.

With over 25 years experience in the design, development and manufacture of electronic equipment, we have the proven experience and technical expertise to produce high quality products to exacting customer requirements.

Home - wave equipment - Rubens’ Tube Amplifier

Rubens’ Tube Amplifier

This stand alone Amplifier (IPC-4315-W) will take either a signal generator input or a stereo (audio) signal input and drive a Rubens’ Tube speaker up to 2.8 Watts (4Ω). The signal generator input is via two 4mm sockets located on the left side of the unit, compatible signal generators to use in conjunction with this driver are the IPC-4744-W and IPC-4885-W. The stereo input is via a 3.5mm jack socket again located on the left side of the unit, this socket can be used to input both music and audio sources from devices such as an iPad or Mobile etc., a 1.2m stereo input cable is provided. The speaker output is via two 4mm sockets and the output level is adjusted by a volume control, both located on the right side of the unit.

A mains adapter is also provided to power the Amplifier at the required 5VDC, the input power socket is located on the left side of the unit, this adapter is suitable for a mains supply ranging from 90VAC to 260VAC (50 to 60Hz).

Description :
Rubens' Tube Amplifier
Part Number :
Electrical Supply :
5VDC (mains adapter included) - 3.5mm socket, centre pin positive
Dimensions :
145 x 65 x 45mm overall
Mass :
Input Impedance :
10kΩ (per channel)
Output Power :
2.8 Watt into 4Ω / 1.8 Watt into 8Ω
Frequency Range :
20Hz to 20kHz
Speaker Impedance Range :
4Ω to 8Ω
Contact us